Leica M500 N, Руководство по обслуживанию

Страница: 36 / 92

Service programs Service manual Leica M500 N, M520, M525
08/2007 GAHE
3-2
Doc Code 10 665 751
Stock n
°
Description / Specification Remark Drawing
Service function
Description Remark
User selection timer setting During the power up routine the control
unit allows to select a user; if no user is
selected within a certain time it will take
the standard settings.
Adjustable between 2..20 seconds.
Default = 11 seconds.
Tube focal length setting The setting influences the displayed
magnification value in the main menu. Adjustable between 100..200.
Set to focal length of main tube.
Default = 170.
Exception reboot timer setting If an error causes an exception reboot of
the control unit, the error can be
displayed for a certain time before the
reboot starts.
Adjustable between 0..20 seconds.
Default = 10 seconds.
Set device list Connected CAN devices have to be set
to “present”.
Not connected CAN devices have to be
set to “Not present”.
If the device list is not set correctly, it
may result in malfunction and/or
error messages. Available CAN
devices:
Stand (M500-N)
Microscope (M500-N)
Microscope (M500-O)
X/Y-Unit (M500-O)
Autofocus (M500-N)
Handle R (M500-N)
Handle L (M500-N)
DI control (M500-N)
Swing carrier (MS3)
Restore factory defaults All standard and user settings will be
reset to the factory default values.
All user settings will be lost.
Autofocus setup Autofocus video parameters and
autofocus range parameters are set in
this menu.
Details in service manual
BIV/Autofocus 10 665 645 .
Stand setup Opens a monitor for entering setup /
service program of the connected stand
system.
Details in the appropriate stand
service manual.
DI Default Settings Shutter functions and shutter mode are
set in this menu.
Details in service manual Neuro
modules 10665683.
DI Color LCD Module Settings Video parameter for the LCD display of
the DI-module are set in this menu.
Details in service manual Neuro
modules 10665683.