Leica M500 N, Руководство по обслуживанию

Страница: 16 / 92

Description Service manual M500 N, M520, M525
08/2007 Gahe
1-12
Doc Code 10 665 751
Display / Keyboard
The communication with the user is done with help of an high-contrast display and a keyboard with nine keys. The
display is a LCD Matrix (240x128 dots) with integrated Graphic controller and backlight.
Can-bus
The CAN-bus has two go-through-input/outputs with two identical parallel connectors.
Hand/Footswitch
There are two RS232 interface-connectors available for all available hand / footswitches. They are wired to the
DUART-interface and are clocked with 4800 Baud. The control unit periodically (60ms) sends a request to the
connected footswitch. It sends back a status code (2 Byte), indicating which key is pressed/not pressed.
Service interface
A double RS232 interface is provided for service purposes. They are both wired directly to the Processor (RXD0/TXD0,
RXD1/TXD1) The connector P7 is used for both of them. COM1 (RXD0/TXD0) is programmed for a service-terminal, for
example for
downloading new software version into the Flash-EPROM.
Additional function
There are two relay-contacts on the control unit connector panel for additional functions. The maximum permissible
loading for one contact is 1 A/24 V DC. The relay-contacts can be programmed to switch- or toggle mode.
Software history
Software
version Release date HW control module Compatibility Remark
1.4 02/98 10 661 330 M500 N
1.54 01/00 -“- M500 N
1.76 04/02 -“- M500 N Supports Can handles, DI C500
1.81 -“- M500 N Supports OH3
1.84 -“- M500 N Supports MS3, CAN handle can
be configured separate
1.87 -“- M500 N, M520, M525 Supports M520, M525
Software compatibility in respect of optics carrier see chapter inspection / step 2.13 .