Leica M 240, Инструкция по эксплуатации

Страница: 65 / 133

EN
189
Pi
ctu
re
mo
de
5. Confirm the setting.
• The setting for
Automatic
is marked as ready for editing.
6. Select the desired setting:
On
to start bracketing automatically
when the shutter is released once;
Off
to release the shutter
individually for each picture.
7. Confirm the setting.
• A set exposure series is indicated in the initial menu list by
XEV
/
X 1
.
8. All pictures are produced by pressing the shutter release
button once or several times (see p. 150).
1
Example, first "
X
" stands for the graduation, the second for the number of
pictures
Notes:
• The following rule applies when using automatic bracketing:
The sensitivity automatically determined by the camera for the
uncorrected picture is also used for all other pictures in a series,
i.e. this ISO value is not changed during a series.
This may mean that the slowest shutter speed specified under
Set maximum exposure time
is exceeded.
• Depending on the initial shutter speed, the working range for
automatic bracketing may be limited.
• Regardless of this, the specified numbers of pictures are always
taken, which may mean that several pictures in a series have the
same exposure.
• Automatic bracketing is also possible when using flash. It is
implemented without regard to the state of charge of the flash
unit, meaning the series may contain shots both with and
without flash.
• The function remains active until it is deactivated in the
Pictures
sub-menu - including after the camera has been turned
off and back on. If it is not deactivated, another series of
pictures is taken each time the shutter release button is
pressed.