Leica M 240 Скачать руководство пользователя страница 110

Страница: 110 / 133

234

Preca

str

tio

FOR THE CHARGER

• If the charger is used in the vicinity of radio receivers, it can

interfere with the reception; make sure there is a distance of at

least 1m between the devices.

• When the charger is in use, it can make a noise (buzzing) – this

is quite normal and is not a malfunction.

• When it is not in use, disconnect the charger from the mains as

otherwise it uses a certain (very small) amount of power even

when no battery is inserted in it.

• Always keep the charger contacts clean, and never short circuit

them.

• The car charging cable supplied

– may only be operated with 12V electrical systems,

– may never be connected while the charger is connected to the

mains.

FOR MEMORY CARDS

• Whilst a picture is being stored or the memory card is being

read, it may not be removed, nor may the Leica M/M-P be

turned off or exposed to vibrations.

• For safety, memory cards should only ever be stored in the anti-

static cover supplied.

• Do not store memory cards where they will be exposed to high

temperatures, direct sunlight, magnetic fields or static

discharge.

• Do not drop or bend a memory card as this can damage it and

result in loss of the stored data.

• Always remove the memory card if you will not be using the

Leica M/M-P for a long period of time.

• Do not touch the connections on the rear of the memory card

and keep them free of dirt, dust and moisture.

• It is recommended that the memory card be reformatted from

time to time, as fragmentation occurs when deleting, which can

block some of the memory capacity.

Содержание M 240






































































































































Результаты поиска

Содержание M 240

Отзывы:

Похожие инструкции для M 240

Бренды по названию

Популярные бренды

Leica M 240, Инструкция по эксплуатации

Результаты поиска

Содержание M 240

Отзывы:

Похожие инструкции для M 240

Бренды по названию

Популярные бренды