iCON grade iCP42, 3D Run Mode
87
Terrace offset
You can move the terrace vertically but not the whole reference surface as is the case with
vertical offset. This is practical when building up a road bank with fixed levels.
Locking the slope
There are two ways to lock a slope setting when working with a String line model:
•
Above the element over which the blade's reference point is currently positioned.
•
Lock the slope for a specific element by choosing the element’s code. Remember that
the element must be coded when creating the string line model in order for this function
to be available.
1. Press
Tools
.
2. Select
Configure model
.
3. Enter the distance the terrace is to be moved.
When moving the terrace downward the entered
value must be negative (-).
4. Use the Back key
to return to run mode.
In run mode, press
Lock
to lock the slope. The key
turns green when the function is activated.
•
The slope above the current element will automat-
ically be locked if none of the settings below are
adjusted.
•
The slope setting for the selected code will be
locked if the function is activated in the settings.
Refer to "Locking slope for an element using a
code", page 88, for more information.
