Leica iCON grade iCP42 Скачать руководство пользователя страница 3

Страница: 3 / 140

iCON grade iCP42, Introduction

Symbols

The symbols used in this manual have the following meanings:

Trademarks

•

GSM is a trademark owned by the GSM Association.

All other trademarks are the property of their respective owners.

Validity of this manual

This manual applies to the iCON grade iCP42.



To use the iCP42 efficiently it’s inalienable to refer to the manual provided together with the
software running on the iCP42.

Type

Description



Danger

Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.



Warning

Indicates a potentially hazardous situation or an unintended use
which, if not avoided, could result in death or serious injury.



Caution

Indicates a potentially hazardous situation or an unintended use
which, if not avoided, may result in minor or moderate injury
and/or appreciable material, financial and environmental damage.



Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.

Содержание iCON grade iCP42













































































































































Результаты поиска

Содержание iCON grade iCP42

Отзывы:

Бренды по названию

Популярные бренды

Leica iCON grade iCP42, Руководство пользователя

Результаты поиска

Содержание iCON grade iCP42

Отзывы:

Бренды по названию

Популярные бренды