EN
52
BALLISTICS OUTPUT FORMATS (ABC
®
)
The Advanced Ballistic Compensation (
AbC
)
function of your Leica Geovid HD-B (not available
for HD-R) allows you to optionally display one of
the following three ballistics values right after the
measured range is displayed:
– the equivalent horizontal range (
EHr
)
– the relevant holdover (
HOLd
)
(not available for HD-R)
– the number of clicks required on the rapid reticle
adjustment (not on HD-R)
Both the displayed holdover and
EHr
values factor
in:
a. the measured range to the target
b. the angle of inclination of the weapon
c. the set ballistic curve
d. the measured temperature and atmospheric
pressure values
e. the set zeroing distance
Notes
• Calculation of the specified values is based on
the currently set ballistic curve, i.e. the curve
must be selected first (see p. 50).
• For safety reasons, ballistic output values are
only specified up to a range of 800 m/
875 yds. The actual measured range is also
specified.
Important
• Please note that particularly at long ranges, the
influence of all relevant ballistic influencing
factors is greatly increased and considerable
variations can occur. The ballistic values
displayed should therefore only be viewed as a
guideline.
• Regardless of whether this information is used,
you are responsible for assessing the relevant
hunting situation.