background image

EN

43

5

ADJUSTING THE FOCUS/

DIOPTER ADJUSTMENT

Use the central focusing wheel 

5

 to set the focus 

for objects at various distances on the Leica 

Geovid HD-B/HD-R. The two diopter compensation 

rings 

6

/

7

 allow a focus adjustment of the reticule 

to compensate for individual vision defects when 

used without eye glasses.

Follow the instructions below with care. Only then 

will you be able to take advantage of the full optical 

functionality of the device.

1. Turn both diopter compensation rings to their 

zero position.

2. Focus on the distant object with both eyes and 

turn the central focusing wheel.

3. Press the main/trigger button 

1

 to activate the 

reticule.

4

4

7

4. Once the reticule appears in your field of vision, 

turn the diopter compensation ring on the right 

7

(red index) until the reticule on the right is in 

clear focus while focusing on the object with 

both eyes.

5. With the reticule still activated, but only focusing 

on the object with your right eye, use the central 

focusing wheel again to finalize the image focus 

on the right.

6. Next, use the diopter compensation ring 

6

 on 

the left to optimize the image focus on the left.

7. The set values are displayed on the diopter 

scales 

7a

 / 

6a

 “+” and “-”.

Note

When setting the focus on either the left or right, 

close the relevantly other eye or cover the relevant 

other lens at the front of the binoculars.

Содержание GEOVID HD-B 3000 Series
































Отзывы: