EN
51
SETTING THE ZEROING DISTANCE
Start with step 1 if you have not previously opened
the menu control, or with step 3 if you have just set
the unit of measure and
SId
is still flashing in the
display.
1. Press and hold the secondary/menu button
2
(≥ 3 s).
•
EU.US
appears.
2. Press the secondary/menu button 2 times
(< 2 s)
• The display switches from
bALL
to
SId
.
3. Pressing the main/trigger button
1
repeatedly
selects the required zeroing distance.
–
100
[m],
–
200
[m] or
–
GEE
[m] or
–
100
[y] or
–
200
[y] or
–
300
[y].
4. Save your setting by briefly pressing the
secondary/menu button.
• The saved setting is initially lit continuously for
4 s as confirmation, then the display switches
to
AbC
and then disappears.
SET BALLISTICS CURVE DISPLAY AND
ZEROING DISTANCE DISPLAY
You can display the 3 values at any time if you want
to verify your settings, e.g. because of a change in
the hunting conditions or if some time has passed
between uses.
Press the secondary/menu button
2
briefly twice.
• The following will appear in sequence for around
2 s each underneath the reticule (instead of the
range, where applicable)
– the set ballistics curve
– the set zeroing distance
– the set ballistic output value