Leica D-Lux 3, Инструкция по эксплуатации

Страница: 113 / 141

Connecting to other equipment
113
*These items cannot be displayed when the
printer does not support the paper sizes.
• [PAGE LAYOUT]
(Possible layouts on the camera)
• An item cannot be selected if the printer
does not support the page layout.
n
Layout printing
• When printing a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set [PAGE
LAYOUT] to [
J
] and then set the
number of prints to 4 for the picture on
[NUM. OF PRINTS].
• When printing different pictures on 1
sheet of paper
For example, if you want to print 4
different pictures on 1 sheet of paper, set
[PAGE LAYOUT] to 4-picture printing
[
J
] and then set [NUM. OF PRINTS]
for the pictures to 1 in [MULTI SELECT]
(P111).
• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [
K
] is indicated.
(Depending on the printer, the icon may
not be displayed.)
• If the remaining battery power becomes
low while the camera and the printer are
connected, the status indicator blinks and
the alarm beeps. If this happens during
printing, press [MENU/SET] and stop
printing at once. If not printing, disconnect
the USB connection cable.
• The camera is receiving an error
message from the printer when the [
*
]
indication lights orange during printing.
After finishing printing, make sure there
are no problems with the printer.
• If the total number of ordered prints or the
number of pictures set for print is large,
printing is performed at intervals. In such
cases, the number of remaining prints
shown on the display will differ from the
number of prints you set. The
discrepancy, however, does not indicate
an error.
• Date print, paper size and page layout
settings on the printer may have priority
over the same settings on the camera.
Check these settings on the printer as
well.
• When printing RAW format files, JPEG
pictures associated with RAW format files
will be printed.
When no associated JPEG picture exists,
printing may not be possible.
• When printing did not go normally, turn
the camera and the printer off and on.
• When the mode dial is set to a choice
other than print mode [ ], [USB MODE
CHANGED. PLEASE REMOVE THE USB
CABLE.] appears on the camera’s LCD
monitor. Set the mode dial back to [
]
before disconnecting the USB cable.
Disconnect the cable after canceling
printing.
2/2*
CARD SIZE 54 mm×85.6 mm
10×15cm 100 mm×150 mm
4 s ×6 s 101.6 mm×152.4 mm
8
s
×10
s
203.2 mm×254 mm
LETTER 216 mm×279.4 mm
F Settings on the printer are
prioritized.
G
1 page with no frame print
H
1 page with frame print
I
2 pages print
J
4 pages print