Leica 6847, Инструкция по эксплуатации

Страница: 59 / 72

EN
59
Pla
ybac
k/R
evie
w mode
EDIT FILE NAMES
▸ Select
SETUP SETUP
▸ Select
Image Numbering Image Numbering
in the main menu
▸ Select
Change Filename Change Filename
in the submenu
• A keyboard submenu is displayed.
• The input line contains the full file name. The three white numerals
in the first group can be changed.
▸ Delete the three selected characters
▸ Enter a new name of your choice (see p. 28)
▸ Confirm
Notes
• The change to a file name applies for all later pictures as well until a
new change is made. The sequential number (second 4-digit group of
numerals) will not be affected by the change; it can, however, be reset
by creating a new folder (see previous page).
• When all user-affected changes are reset, then the file name will once
again be “L100XXXX.XXX”.
• A keyboard submenu is displayed with the full file title in the title
line. The three numbers in the first group are highlighted white and
can be edited.
CREATING A NEW FOLDER
▸ Select
SETUP SETUP
▸ Select
Image Numbering Image Numbering
in the main menu
▸ Select
New Folder New Folder
in the submenu
• A keyboard submenu is displayed.
• The input line contains the full folder name. The five white charac-
ters can be modified.
▸ Delete the five selected characters
▸ Enter a name of your choice
▸ Confirm
• A prompt appears. Here you decide if you want the file numbers in
the new folder to start at 0001 again (
Yes Yes
) or if the numbering
should continue (
No No
).
Notes
• A file name change also applies to all subsequent folders or until
another change is made.
• When all user-affected changes are reset, then the folder name will
once again be “XXXLEICA”.
• You can create a new folder at any time.
RESETTING IMAGE NUMBERING
▸ Select
SETUP SETUP
▸ Select
Image Numbering Image Numbering
in the main menu
▸ Select
Reset Image Numbering Reset Image Numbering
in the submenu
• A relevant prompt is displayed.
▸ Confirm the creation of a new folder (
Yes Yes
) or cancel the new folder (
No No
).
Note
The name part of a new folder created using
Reset Reset
remains unchanged.
The file numbers in the folder will start again at 0001.
ADDING COPYRIGHT INFORMATION
This camera allows you to enter letters and other characters as a
copyright mark for your picture files.
You can enter up to 17 characters of information under 2 headings per
picture.
▸ Select
SETUP SETUP
▸ Select
Camera Information Camera Information
in the main menu
▸ Select
Copyright Information Copyright Information
in the submenu
▸ Activate the
Copyright Copyright
function (
On On
)
▸ Select
Information Information
/
Artist Artist
in the submenu
• A keyboard submenu is displayed.
▸ Enter the desired information (see p. 28)
▸ Confirm
RECORDING THE IMAGE LOCATION WITH GPS
The GPS (global positioning system) allows the pinpointing of a receiver
anywhere in the world. When the function is activated the Leica S3
continuously receives the corresponding signals and updates the position
data. It can write this information - latitude and longitude, height above
sea level - to the "EXIF" data.
Please read the important information provided on the topic of GPS (see
p. 4) before you activate this function
▸ Select
SETUP SETUP
▸ Select
GPS GPS
in the main menu
▸ Function activation (
On On
) or deactivation (
Off Off
)
• The “satellite” icon in the top display indicates the current status:
– most recent geolocation max. 6 min ago
– most recent geolocation max. 24 hrs ago
– no geolocation data available