Leica 6847 страница 47 Скачать руководство пользователя

Страница: 47 / 72

Pictur

e mode (Pho

tog

raph
y)

FLASH PHOTOGRAPHY

This camera determines the required flash output by firing several

pre-flashes in rapid succession, fractions of a second before taking the

actual picture. The main flash fires immediately after, at the start of

exposure.

All factors influencing exposure (e.g. filters, aperture settings, distance to

the main subject, reflective ceilings, etc.) are automatically considered.

COMPATIBLE FLASH UNITS

The following flash units enable all Leica S3 functions described in this

manual:

– Leica system flash units

– Flash units that satisfy the technical requirements of a system 3002

System Camera Adaptation (SCA), are equipped with the adapter

SCA-3502-M5

1.2

and allow guide number (GN) control.

– Other commercially available flash attachments with a standard flash

foot

3.4

and a positive center contact, which are fired via the center

contact (X contact) can also be used (without TTL flash control).

When using the SCA-3502 adapter (version 5 or higher), the white balance can be set

Automatic

to ensure correct color rendering.

The use of third party system flash units or SCA adapters of other camera systems is

not recommended, as their differing contact positions and assignment may cause

malfunctions or device damage.

White balance should be set to (manually if necessary) where flash units are used that

are not designed specifically for the camera.

The aperture and sensitivity specified at the lens may have to be entered manually on

the flash unit.

CONNECTION VIA FLASH SHOE

All flash units and studio flash systems that meet the currently valid ISO

standard 10330, and the older DIN 19014 standard (positive polarity at

the X contact).

Note

Please contact the Leica Camera AG Customer Service department or

the service department at a Leica subsidiary near you if you wish to

connect a studio flash system to the Leica S3 that does not comply with

the ISO standard.

CONNECTION VIA THE LOWER LEMO® JACK

All flash units and studio flash systems that can be cable controlled can

be connected.

CONNECTION VIA THE FLASH CONNECTION JACK

All studio flash systems and other flash units with flash cable and

standard flash jack can be connected.

ATTACHING THE FLASH UNIT

▸

Switch off the camera and flash unit

▸

Slide the foot of the flash unit all the way into the accessory shoe and

use the clamping nut (where available) to secure it against accidental

detaching.
• Movement inside the accessory shoe can interrupt required

contacts and therefore cause malfunctions.

Note

The camera and flash unit must be switched off before the connection is

made.

FLASH EXPOSURE METERING (TTL METERING)

A fully automatic, camera-controlled TTL flash operation is available in

the Leica S3 for all exposure modes in conjunction with system-compati-

ble flash units. An additional brightening control is provided. Should the

ambient brightness require a shorter shutter speed than the sync speed

(1⁄125 s with focal plane shutter, 1⁄1000 s for lenses with central shutter)

or if it is set manually, then any system-compatible flash unit will

automatically be switched to linear flash mode (HSS, see next section).

The Leica S3 additionally communicates the sensitivity and aperture

setting to the flash unit. The flash unit can therefore automatically adjust

the range information, provided the device comes with these displays.

Notes

• The settings and functions described in the following sections only

apply to those available in the Leica S3 and system-compatible flash

units.

• An exposure compensation set on the camera will only affect the

measurement of available light. Additional settings on the flash unit will

be required if you want to simultaneously use compensation of the TTL

flash exposure metering in flash mode (parallel or opposed).

• Please read the relevant instructions provided with the device for more

information about flash use and the various available flash modes

when using flash units that are not designed specifically for use with

Leica S3.

Содержание 6847









































































Результаты поиска

Содержание 6847

Отзывы:

Похожие инструкции для 6847

Бренды по названию

Популярные бренды

Leica 6847, Инструкция по эксплуатации

Результаты поиска

Содержание 6847

Отзывы:

Похожие инструкции для 6847

Бренды по названию

Популярные бренды