Leica 6847 страница 49 Скачать руководство пользователя

Страница: 49 / 72

Pictur

e mode (Pho

tog

raph
y)

STROBOSCOPE FLASH MODE

(with system-compatible flash units)

This flash method, in which several flashes are fired during an exposure,

is available in all exposure modes of the camera. The camera will

automatically set the shutter speed needed for selected number of

flashes and their frequency using the flash modes. The light balance

display will indicate if the required shutter speed would result in an

overexposure because of the available light. Where the shutter speed

would result in a too short shutter speed, the time display in the

viewfinder and in the top display will flash. Changing the number of

flashes and the flash frequency, the aperture and/or the shutter speed

will help to compensate the exposure. The focus range of the flash unit,

number of flashes, distance, and of course the aperture are crucial

factors when trying to capture successful stroboscopic images, where

several phases of a motion sequence are captured. Please read the flash

unit manual for more information.

Note

HSS flash technology offers less range.

MANUAL FLASH PHOTOGRAPHY WITH UNIFORM FLASH OUTPUT

The flash output volume will not be controlled if the flash unit is used in

manual flash mode at full power or at permanent partial power (provided

the flash unit offers this setting option). The camera’s exposure modes

essentially function the same way as without flash.

The flash is suppressed if the flash sync speed drops below the set value

in mode

or if a speed is set below the sync speed in mode

The lens aperture to be set is determined by the flash output, the

sensitivity and the distance to the subject. Conversely, the partial flash

output to be set is determined by the aperture, the sensitivity, the focal

length and the distance to the subject (see flash unit manual).

FLASH PHOTOGRAPHY VIA THE LOWER LEMO

JACK

Flash units and large studio flash systems can be connected to the lower

LEMO® jack via a cable using the LEMO® plug (supplied). The LEMO®

jack comes with an automatic lock to prevent accidental disconnection.

The camera cannot "recognize" the flash unit and will therefore behave as

if no flash unit was attached. The exposure time must be set manually to

the flash sync speed 1⁄125 s or 1⁄1000 s with central shutter, or to slower

speeds. There will be no automatic switch-over. The flash ready and

control displays are not active.

FLASH EXPOSURE DISPLAYS IN THE VIEWFINDER

(with system-compatible flash units)

The flash icon in the viewfinder display of the Leica S3 reports and

indicates various operating states.

does not appear

(despite the flash unit

being switched on and

ready)

The flash unit cannot fire. A correct operat-

ing mode must be set on the flash unit.

flashes before the

picture is taken

The flash unit is not ready.

lights up before the

picture is taken

The flash unit is ready.

remains continuously

lit after firing

The flash is still ready.

Exposure compensation

is set

is displayed as well.

Содержание 6847









































































Результаты поиска

Содержание 6847

Отзывы:

Похожие инструкции для 6847

Бренды по названию

Популярные бренды

Leica 6847, Инструкция по эксплуатации

Результаты поиска

Содержание 6847

Отзывы:

Похожие инструкции для 6847

Бренды по названию

Популярные бренды