Leica Geosystems SPRINTER 100, Руководство пользователя

Страница: 44 / 84

44 SPRINTER 100/100M/200/200M
Data and Memory Management
(only SPRINTER 100M/200M)
6 Data and Memory Management (only SPRINTER 100M/200M)
In this chapter
Topic Page
6.1 Viewing Data 45
6.2 Downloading Data 46
6.3 Deleting Data 46
Description • The data is stored in internal memory or to an external device such as PDA, Data
Collector or PC through the RS232 interface.
• Data is stored in two memory types:
1. Measurement memory: Measurements to various target points.
2. Measured fixed point memory: Measurements to the Reference points.
• Starting a job, all the available internal memory is reserved for measurements and
measured fixed points.
• When the internal memory is low, a "Low Memory!" message is flashed at every 5
measurements. Until the internal memory is full, a "Memory Full!" message is displayed.
• An internal memory can store a maximum of 500 measurements data.
• If a measurement is not successful, e.g. invalid measurement, staff too far, etc, no
measurement data is recorded.
• In menu Data Manager; Viewing Data, Downloading Data and Deleting Data routine
can be performed.