Leica Geosystems SPRINTER 100 Скачать руководство пользователя страница 29

Страница: 29 / 84

User Interface

SPRINTER 100/100M/200/200M

Edit displayed Point
ID (PtID)

Edit a few characters of displayed (old) Point ID:

Use scrolling keys to highlight the desired character in the entry field.

Acknowledge the character entry by pressing the ENTER key.

The next entry field (to the right) is highlighted for further editing.

Repeat step 2 and 3 until a complete value has been entered.

To accept the new Point ID, simply press the ENTER key with

"SPACE" character in the entry field at the end of the Point ID string.

Press key to restore old value.

Step

Key

Description

Step

Key

Description

The cursor is always at the first character in standby manner for

editing.

If there is no change for any particular character in the existing entry

field, press ENTER key to accept the old entry.

Highlight the desired character to be change in entry field with the

scrolling keys.

Содержание SPRINTER 100





















































































Результаты поиска

Содержание SPRINTER 100

Отзывы:

Бренды по названию

Популярные бренды

Leica Geosystems SPRINTER 100, Руководство пользователя

Результаты поиска

Содержание SPRINTER 100

Отзывы:

Бренды по названию

Популярные бренды