2006-2013 FXD Renegade Rev. 6
4.
See Fig. 3.
Install front frame mounting tab bolt
through trike frame, spacer and H-D using the
following hardware.
(1) Spacer- S001050
(1) 1/4” x 1-3/4” Hex Bolt- CB1100
(2) 1/4" Flat Washers- CW2005
(1) 1/4” Lock Nut- CN3040
5.
Tighten rear bolts and lower front tab bolt. Leave
upper front bolts until floorboard mounts are
adjusted.
6.
See Fig. 4.
Use 1/2" x 2-1/2” bolts to mount floor
board brackets to H-D frame. Secure using the
following hardware.
(2) 1/2" x 2-1/2” Hex Bolts- CB1417
(4) 1/2” Flat Washer- CW2015
(2) 1/2” Lock Nut- CN3060
7.
See Fig. 5.
Install cross brace between frame braces and
floorboard mounts using the following hardware. Do not
tighten floorboard mounts until later in build.
(1) Cross Brace- LB6113
(2) 3/8” x 1-1/4” Bolt- CB1240
(2) 3/8” Lock Washer- CW2050
(2) 3/8” Flat Washer- CW2015
Fig. 3
Front frame tab
S001050 Spacer
16
Fig. 4
Cross Brace
Floorboard Mount
Fig. 5
