6
CONFIGURATION
The configuration process establishes the appropriate parameters for operation. This is done
through the use of an LMCT-100 configuration tool. If no configuration steps are taken, the sensor
will use its default values for setpoints.
The LMCT-100 Wireless IR Configuration Tool is a handheld tool for setup and testing of
Wattstopper Digital Lighting Management (DLM) devices. It provides wireless access to
occupancy and daylighting sensors for setup and parameter changes, Wattstopper Push n’
Learn™ (PnL) technology for load configuration, switch and dimmer assignment and operating
parameter changes. The LMCT-100’s display shows menus and prompts to lead you through each
process. The navigation pad provides a familiar way to navigate through the customization fields.
The LMCT-100 allows modification of the system without requiring ladders or tools; simply with a touch of a few buttons.
Operation
The LMCT-100’s IR transceiver allows bi-directional communication between DLM devices and the LMCT-100. Simple menu screens let
you see the current status of the system and make changes.
For systems including the LMLS-500 daylighting sensor the LMCT-100 can also set or change the daylight parameters. The LMCT-100
can change dimming system options such as scene assignments, ramp rates and other options not available through the standard user
interface.
Batteries
The LMCT-100 operates on three standard 1.5V AAA Alkaline batteries or
three rechargeable AAA NiMH batteries.
The battery status displays in the upper right corner of the display. Three bars next to BAT=
indicates a full battery charge. A warning appears on the display when the battery level falls
below a minimum acceptable level.
To conserve battery power, the LMCT-100 automatically shuts OFF 10 minutes after the
last key press.
Navigation
You navigate from one field to another using
(up) or
(down) arrow keys. The active
field is indicated by flashing (alternates between yellow text on black background and black
text on yellow background).
Once active, use the
Select
button to move to a menu or function within the active field.
Value fields are used to adjust parameter settings. They are shown in “less-than/greater-
than” symbols: <value>. Once active, change them using
(left) and
(right) arrow keys.
In general the
key increments and the
key decrements a value. Selections wrap-
around if you continue to press the key beyond maximum or minimum values. Moving
away from the value field (using
/
keys) overwrites the original value.
The
button takes you to the main menu.
The
button can be thought of as an undo function. It takes you back one screen.
Changes that were in process prior to pressing the
key are lost.
Home Menu
The Home (or Main) menu displays after the power-up process completes. It contains
information on the battery status and six menu choices.
Press
/
to locate the desired function then press
Select
.
Select
Button
Up or Down
Button
S e n s o r C o n fi g u r a t i o n
L o a d C o n fi g ( P n L )
D a y l i g h t i n g C o n fi g
B u t t o n C o n fi g u r a t i o n
D i m m i n g C o n fi g u r a t i o n
M o r e
=
B AT
Press Left/Right arrow
to select a value
Value Fields
Parameters
S E N D N E X T Z O N E D O N E
D a y l i g h t i n g L M L S - 5 0 0
Z o n e 1
D i m m ed
S e t p o i n t :
R a m p U p:
R a m p D o w n:
C u t O ff Delay:
< 5 0 f c >
< 2 0 % s e c >
< 2 % s e c >
< 1 0 m i n>
Function Fields (on Home Menu)
S e n s o r C o n fi g u r a t i o n
L o a d C o n fi g ( P n L )
D a y l i g h t i n g C o n fi g
B u t t o n C o n fi g u r a t i o n
D i m m i n g C o n fi g u r a t i o n
M o r e
=
B AT
Fig. 10: LMCT-100
Fig. 11: Battery Location
Sensor Configuration
Load Config (PnL)
Daylighting Config
Button Configuration
Dimming Configuration
More
Home/
Main Menu
Up
Select
Down
Right/Next
Left
Back
Power
On/Off
IR Window
BAT=
Fig. 12: LMCT-100 Controls
Содержание Wattstopper LMLS-500
Страница 15: ...15...
