LEGRAND Wattstopper LMLS-500, Руководство по установке

Страница: 12 / 16

12
If Hold Off = < Yes >, the sensor will limit the loads to the level
presently allowed by daylight contribution. This means that the
loads may not initially turn ON (if the ambient light level is high
- above the ON or Dimming Setpoint), but will become active
for daylighting control, and will turn ON or dim up as daylight
contribution drops.
Scenes Stop DL
When set to No the sensor
adjusts levels, up to that recorded
in the scene, even though a
scene is active. When set to Yes,
daylighting control is disabled
for any loads on which a scene
is recalled until a change is
manually made to the level of the
load, or until the next cycle of occupancy.
Ignore After Hours
When set to Yes , the photosensor
will ignore After Hours and will
continue to operate as normal.
When set to
No , the daylighting
controlled loads that are set to
After Hours are removed from
daylighting control for the duration
of the After Hours period.
Send
Next
The Next parameter provides a screen that displays inormation
about the daylioght ratio and elecric light contribution.
DR = Daylight Ratio is the relationship between the daylight
measured at the photocell versus the daylight per zone.
EL = Electric Light is the measured artificial light contribution per
zone.
Send
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T Z O N E D O N E
S e t p o i n t :
R a m p U p :
R a m p D o w n :
C u t O f f D e l a y :
< 5 0 f c >
< 2 0 % s e c >
< 2 % s e c >
< 1 0 m i n >
Z o n e 1 D i m m e d
Press the Down Arrow
to choose SEND
Point and
Press Select
L M L S - 5 0 0 0 2 9 3 7 2 5 9 0 9
Z o n e S e t u p
C a l i b r a t i o n
Z o n e S e t t i n g s
A d v a n c e d S e t t i n g s
C o n t r o l M o d e
Zone Settings have been saved.
The screen returns back to the
previous menu.
P o i n t t o A n y I R
e n a b l e d d e v i c e o n
t h e n e t w o r k
P r e s s ‘ S e l e c t ’
ZONE SETTINGS (CONTINUED)
ADVANCED SETTINGS
Advanced settings allows you to
see the light level at the photocell
and to adjust the override mode
and the override time delay.
Light Level
Present light level measured at
the LMLS-500.
Allow Override
Determines if override mode is
permited, while daylighting control
is active. Available choices: Yes
or No
Override Time
Override Time selects the time
delay, after daylighting control has
been disabled due to an observed
external user or system action,
before automatic control resumes.
Range: Infinity or 1 to 24 hours.
Hold OFF
The Hold Off setting selects the
behavior of daylighting loads
when they are turned ON, by a
switch or occupancy sensor.
If Hold Off = <
No > (default), the
loads can always be turned on to
their previous level, and then will
begin to adjust based upon daylight.
Press
Select
L M L S - 5 0 0 0 2 9 3 6 1 1 9 3 5
Z o n e S e t u p
C a l i b r a t i o n
Z o n e S e t t i n g s
A d v a n c e d S e t t i n g s
C o n t r o l M o d e
Choose
Advanced Settings
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T
L i g h t L e v e l :
A l l o w O v e r r i d e :
O v e r r i d e T i m e :
H o l d O f f :
S c e n e s S t o p D L :
3 0 0 f c
< Ye s >
< I n fi n >
< N o >
< N o >
I g n o r e A f t e r H o u r s : < N o >
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T
L i g h t L e v e l :
A l l o w O v e r r i d e :
O v e r r i d e T i m e :
H o l d O f f :
S c e n e s S t o p D L :
I g n o r e A f t H r s :
3 0 0 f c
< Ye s >
< I n fi n >
< N o >
< N o >
< N o >
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T
L i g h t L e v e l :
A l l o w O v e r r i d e :
O v e r r i d e T i m e :
H o l d O f f :
S c e n e s S t o p D L :
I g n o r e A f t H r s :
3 0 0 f c
< Ye s >
< I n fi n >
< N o >
< N o >
< N o >
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T
L i g h t L e v e l :
A l l o w O v e r r i d e :
O v e r r i d e T i m e :
H o l d O f f :
S c e n e s S t o p D L :
I g n o r e A f t H r s :
3 0 0 f c
< Ye s >
< I n fi n >
< N o >
< N o >
< N o >
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T
L i g h t L e v e l :
A l l o w O v e r r i d e :
O v e r r i d e T i m e :
H o l d O f f :
S c e n e s S t o p D L :
I g n o r e A f t H r s :
3 0 0 f c
< Ye s >
< I n fi n >
< N o >
< N o >
< N o >
Press the Down Arrow
to choose SEND
P o i n t o t A n y I R
e n a b l e d d e v i c e o n
t h e n e t w o r k
P r e s s ‘ S e l e c t ’
Point and
Press Select
L M L S - 5 0 0 0 2 9 3 7 2 4 9 0 9
Z o n e S e t u p
C a l i b r a t i o n
Z o n e S e t t i n g s
A d v a n c e d S e t t i n g s
Te s t M o d e
Advanced Settings have been saved.
The screen returns to the Daylighting
Parameters menu.
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T
L i g h t L e v e l :
A l l o w O v e r r i d e :
O v e r r i d e T i m e :
H o l d O f f :
S c e n e s S t o p D L :
I g n o r e A f t H r s :
7 0 f c
< Ye s >
< I n fi n >
< N o >
< N o >
< N o >
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T
L i g h t L e v e l :
A l l o w O v e r r i d e :
O v e r r i d e T i m e :
H o l d O f f :
S c e n e s S t o p D L :
I g n o r e A f t H r s :
3 0 0 f c
< Ye s >
< I n fi n >
< N o >
< N o >
< N o >
Choose NEXT
then Press ‘Select’
Press ‘Select’
Selecting PRIOR will bring you
back to the previous screen.
D a y l i g h t i n g L M L S - 5 0 0
P R I O R
D R Z 1 : 3 0 0 f c / 3 0 0 f c
D R Z 2 : 3 0 0 f c / 3 0 0 f c
D R Z 3 : 3 0 0 f c / 3 0 0 f c
E L Z 1 : 3 0 0 . 0 f c
E L Z 2 : 3 0 0 . 0 f c
E L Z 3 : 3 0 0 . 0 f c
S E N D N E X T
L i g h t L e v e l :
O v e r r i d e M o d e :
O v e r r i d e T i m e :
A c t i v e W h e n :
S c e n e s S t o p D L :
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T
L i g h t L e v e l :
A l l o w O v e r r i d e :
O v e r r i d e T i m e :
H o l d O f f :
S c e n e s S t o p D L :
I g n o r e A f t H r s :
7 0 f c
< Ye s >
< I n fi n >
< N o >
< N o >
< N o >
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T
L i g h t L e v e l :
A l l o w O v e r r i d e :
O v e r r i d e T i m e :
H o l d O f f :
S c e n e s S t o p D L :
I g n o r e A f t H r s :
7 0 f c
< Ye s >
< I n fi n >
< N o >
< N o >
< N o >