LEGRAND Wattstopper LMLS-500, Руководство по установке

Страница: 11 / 16

11
Zone Settings allows you to modify
the photosensor Daylighting
Setpoints, Time Delays and Ramp
Rates.
When Zone Settings is selected,
one of two screens is displayed
depending on the Operation Mode
of the Zone (Switched) or (Dimming,
Bi-Level or Tri-Level):
Switched, Bi-Level or Tri-Level Dimmed
Switched, Bi-Level, or Tri-Level
ON Setpoint
The target illuminance level below
which the LMLS-500 turns the lights
ON.
Range: 5 to 150 fc.
OFF Setpoint
The target illuminance level above
which the LMLS-500 turns the lights
OFF.
The OFF Setpoint corresponds to
the ON Setpoint multiplied by 1.25,
1.50, 1.75 or 2.0.
This ensures that the OFF Setpoint
is always higher than the ON
Setpoint.
ON Time Delay
The time interval that must elapse,
with the measured level below the
ON Setpoint, before the controlled
lights turn ON.
Range: 1 sec to 60 sec.
OFF Time Delay
The time interval that must elapse,
with the measured level above the
OFF Setpoint, before the controlled
lights turn OFF.
Range: 3 min to 30 min.
ZONE SETTINGS
Send
Dimmed
Setpoint
The desired light level at the
task per zone. To determine the
correct dimming level for any given
photocell reading, it calculates the
level based on the slope between
the daylight contribution at the
sensor and the setpoint.
Range: 5 to 200 fc.
Ramp Up
Determines the speed (or rate) at
which the light level of bound loads
increases. The default is 20% per
second because the end user
needs light quickly.
Range: 1% per second to 100%
per second.
Ramp Down
Determines the speed (or rate) at
which the light level of bound loads
decreases. The default is 2% per
second because a slow ramp
down will help the eye adapt to the
new light level.
Range: 1% per second to 100%
per second.
Cut Off Delay
The time that the controlled lighting
will remain at a minimum dimmed
level, even with high daylight
contribution, before the lights will
be switched OFF.
Range: Never to 30 min.
L M L S - 5 0 0 0 2 9 3 7 2 4 9 0 9
Z o n e S e t u p
C a l i b r a t i o n
Z o n e S e t t i n g s
A d v a n c e d S e t t i n g s
Te s t M o d e
Choose
Zone Settings
Press
Select
D a y l i g h t i n g L M L S - 5 0 0
Z o n e 1 B i - L e v e l
O N S e t p o i n t :
O F F S e t p o i n t :
O N T i m e D e l a y :
O F F T i m e D e l a y :
< 3 5 f c >
< 5 3 f c >
< 2 0 s e c >
< 1 0 m i n >
S E N D N E X T Z O N E D O N E
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T Z O N E D O N E
S e t p o i n t :
R a m p U p :
R a m p D o w n :
C u t O f f D e l a y :
< 5 0 f c >
< 2 0 % s e c >
< 2 % s e c >
< 1 0 m i n >
Z o n e 1 D i m m e d
Press Left/Right arrow
to raise or lower
OFF Setpoint footcandles
O N S e t p o i n t :
O F F S e t p o i n t :
O N T i m e D e l a y :
O F F T i m e D e l a y :
< 3 5 f c >
< 5 3 f c >
< 2 0 s e c >
< 1 0 m i n >
D a y l i g h t i n g L M L S - 5 0 0
Z o n e 1 B i - L e v e l
S E N D N E X T Z O N E D O N E
Press Left/Right arrow
to raise or lower
ON Time Delay <1sec - 60sec>
O N S e t p o i n t :
O F F S e t p o i n t :
O N T i m e D e l a y :
O F F T i m e D e l a y :
< 3 5 f c >
< 5 3 f c >
< 2 0 s e c >
< 1 0 m i n >
D a y l i g h t i n g L M L S - 5 0 0
Z o n e 1 B i - L e v e l
S E N D N E X T Z O N E D O N E
D a y l i g h t i n g L M L S - 6 0 0
O N S e t p t :
O F F S e t p t :
O N T i m e D e l a y :
O F F T i m e D e l a y :
< 0 . 3 0 0 f c >
< 0 . 4 5 0 f c >
< 2 0 s e c >
< 1 0 m i n >
Press Left/Right arrow
to raise or lower
ON Setpoint footcandles
B i - L e v e l
S E N D
Press Left/Right arrow
to raise or lower
OFF Time Delay <3min - 30min>
O n S e t p o i n t :
O F F S e t p o i n t :
O N T i m e D e l a y :
O F F T i m e D e l a y :
< 7 . 5 f c >
< 1 1 f c >
< 2 0 s e c >
< 1 0 m i n >
D a y l i g h t i n g L M L S - 5 0 0
Z o n e 1 B i - L e v e l
S E N D N E X T Z O N E D O N E
D a y l i g h t i n g L M L S - 5 0 0
S e n d
O N S e t p o i n t :
O F F S e t p o i n t :
O N T i m e D e l a y :
O F F T i m e D e l a y :
< 7 . 5 f c >
< 1 1 f c >
< 2 0 s e c >
< 1 0 m i n >
Press the Down Arrow
to choose SEND
Point and
Press Select
L M L S - 5 0 0 0 2 9 3 7 2 4 9 0 9
Z o n e S e t u p
C a l i b r a t i o n
Z o n e S e t t i n g s
A d v a n c e d S e t t i n g s
Te s t M o d e
LMLS-500 Daylighting Menu
Zone Settings have been saved.
The screen returns to the Daylighting
Parameters menu.
Z o n e 1 B i - L e v e l
P o i n t t o A n y I R
e n a b l e d d e v i c e o n
t h e n e t w o r k
P r e s s ‘ S e l e c t ’
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T Z O N E D O N E
S e t p o i n t :
R a m p U p :
R a m p D o w n :
C u t O f f D e l a y :
< 5 0 f c >
< 2 0 % s e c >
< 2 % s e c >
< 1 0 m i n >
Z o n e 1 D i m m e d
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T Z O N E D O N E
S e t p o i n t :
R a m p U p :
R a m p D o w n :
C u t O f f D e l a y :
< 5 0 f c >
< 2 0 % s e c >
< 2 % s e c >
< 1 0 m i n >
Z o n e 1 D i m m e d
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T Z O N E D O N E
S e t p o i n t :
R a m p U p :
R a m p D o w n :
C u t O f f D e l a y :
< 5 0 f c >
< 2 0 % s e c >
< 2 % s e c >
< 1 0 m i n >
Z o n e 1 D i m m e d
D a y l i g h t i n g L M L S - 5 0 0
S E N D N E X T Z O N E D O N E
S e t p o i n t :
R a m p U p :
R a m p D o w n :
C u t O f f D e l a y :
< 5 0 f c >
< 2 0 % s e c >
< 2 % s e c >
< 1 0 m i n >
Z o n e 1 D i m m e d