LEGRAND Trimod MCS 10 страница 40 Скачать руководство пользователя

Страница: 40 / 60

6.5

POWER ON/OFF menu

When the EPS is on, it is possible to access a menu called POWER ON/OFF by pressing the ON/OFF pushbutton for less

than 0,5 seconds.

The choices that can be made in this menu are the following:

L1 phase (**)

Press the ENTER key to access the submenu in which it is possible to choose whether to

turn phase L1 on or off independently of the others.

Press the ARROW UP/DOWN keys to choose the ON or the OFF value. Press the ENTER key

to confirm the value. Press the ESC key to leave the submenu.

L2 phase (**)

Press the ENTER key to access the submenu in which it is possible to choose whether to

turn phase L2 on or off independently of the others.

Press the ARROW UP/DOWN keys to choose the ON or the OFF value. Press the ENTER key

to confirm the value. Press the ESC key to leave the submenu.

L3 phase (**)

Press the ENTER key to access the submenu in which it is possible to choose whether to

turn phase L3 on or off independently of the others.

Press the ARROW UP/DOWN keys to choose the ON or the OFF value. Press the ENTER key

to confirm the value. Press the ESC key to leave the submenu.

UPS

Press the ENTER key to access the submenu to switch the EPS off.

Press the ENTER key again to switch the equipment off. Press the ESC key to leave the

submenu.

Hot swap

Press the ENTER key to access a submenu to make the hot-swap substitution of the power

modules.

CAUTION

This operation CANNOT BE PERFORMED

(**) Available with the inverter set up as three independent phases only

6.6

Switching off the EPS

CAUTION

The shutdown procedure must be applied exclusively if the load is off or does not need to be supplied by the EPS.

There are two possible ways to shut down the UPS.

It is possible to shut down the UPS from the POWER ON/OFF menu or it is possible to perform the following procedure:

1. Keep the ON/OFF key pressed for at least two seconds.

2. The display shows the text "Turn off the UPS?". Press the ENTER key.

3. Wait for the shutdown operations to complete.

If a prolonged shutdown is planned, apply what is prescribed in chapter 9.

6.7

Switching on the EPS

The operator can turn the equipment on with the following procedure:

1. Press the ON/OFF key.

2. When the display shows the text “<ENTER> to confirm UPS turn ON”, press the ENTER key. If no operation is carried out

within 30 seconds, the EPS turns off.

If the display shows the message "WARNING: different UPS setup! <ENTER> to confirm UPS turn on”, the EPS setup is

different from the last power up. A skilled technican must check the setup before confirming the power up.

3. Wait for the power up operations to complete. The load is only supplied when the bar with the text “UPS initialize...”

displayed reaches the end and the main screen appears.

6. Control panel

Содержание Trimod MCS 10





























































Результаты поиска

Содержание Trimod MCS 10

Отзывы:

Похожие инструкции для Trimod MCS 10

Бренды по названию

Популярные бренды

LEGRAND Trimod MCS 10, Руководство пользователя

Результаты поиска

Содержание Trimod MCS 10

Отзывы:

Похожие инструкции для Trimod MCS 10

Бренды по названию

Популярные бренды