background image

Trimod MCS

U

ser manual

7

-  repairs that have not been authorised by the LEGRAND Technical Support Service;

-  damage caused intentionally, through negligence, by acts of God, natural phenomena, fire or liquid infiltration.

-  damage caused by the use of batteries or protections other than those indicated in the installation and maintenance 

manual;

-  damage caused by failure to install or establish the safety protections indicated in the manuals, or by failure to comply 

with the safety labels.

Transfer of the equipment to others also requires the handing over of all the manuals. Failure to hand over the manuals 

shall automatically nullify any right of the buyer, including the terms of the guarantee where applicable.

If the equipment is sold to another party in a country where a different language is spoken, the original owner shall be 

responsible for providing a faithful translation of the manuals in the language of the country where the equipment will 

be used.

1.6.1 Guarantee terms

The terms of the guarantee may vary depending on the country where the EPS is sold. Check the validity and duration 

with LEGRAND's local sale representative.

If there should be a fault in the equipment, contact the LEGRAND Technical Support Service which will provide all the 

instructions on what to do. 

Do not send anything back without LEGRAND's prior authorization.

The guarantee becomes void if the EPS has not been brought into service by a properly trained skilled technician 

(see paragraph 2.2.1).

If during the guarantee period the EPS does not conform with the characteristics and performance laid down in this man-

ual, LEGRAND at its discretion will repair or replace the EPS and relative parts.

All the repaired or replaced parts will remain LEGRAND's property.

LEGRAND is not responsible for costs such as: 

- losses of profits or earnings; 

- losses of equipment, data or software; 

- claims by third parties; 

- any damage to persons or things due to improper use, unauthorized technical alterations or modifications; 

- any damage to persons or things due to installations where the full compliance with the standard regulating the specific 

usage applications have not been guaranteed. 

1.6.2 Guarantee extension and maintenance contracts

The standard guarantee can be consolidated in an extension contract (maintenance contract). 

Once the guarantee period has passed, LEGRAND is available for giving a technical assistance service able to meet all 

requirements, maintenance agreements, 24/7 availability and monitoring. 

For more information contact the LEGRAND Technical Support Service.

1.7 

Copyright

The information contained in this manual cannot be disclosed to any third party. Any partial or total duplication of the 

manual by photocopying or other systems, including electronic scanning, which is not authorised in writing by the Man-

ufacturer, violates copyright conditions and may lead to prosecution.

LEGRAND reserves the copyright of this publication and prohibits its reproduction wholly or in part without pre-

vious written authorisation.

Содержание Trimod MCS 10





























































Отзывы: