LEGRAND Trimod MCS 10, Руководство пользователя

Страница: 21 / 60

Trimod MCS
U
ser manual
21
4.1 Visual check
On delivery of the EPS, carefully inspect the packaging and the product for any damage that might have occurred during
transport. Check there is no damage to the indicator on the outer label reading "Shock Watch".
If there is possible or ascertained damaged immediately inform:
- the transporter;
- the LEGRAND Technical Support Service.
Check the equipment corresponds with the material indicated in the delivery documentation.
Follow the instructions in Chapter 9 when storing the equipment.
4.1.1 Equipment and supplied accessories check
The equipment and the relative supplied accessories must be in a perfect state of repair.
Check that:
- the shipping data (address of the recipient, no. of packages, order no, etc.) correspond to what is contained in the deliv-
ery documentation;
- the technical rating plate data on the label applied to the EPS correspond with the material purchased, described in the
delivery documentation;
- the documentation accompanying the equipment includes the installation manual and the user manual.
In case of discrepancy, immediately inform the LEGRAND Technical Support Service before commissioning the equip-
ment.
4.2 Unpacking
To remove the packaging material, comply with the icons on the outside of the box and observe the following procedure:
1. cut the wrapping material and open the plastic packaging safety holds;
2. open the top of the box;
3. remove the upper protection;
4. remove the four protective corners;
5. remove the packaging container pulling it upwards;
6. remove the pallet and the front/rear bracket from the EPS by undoing the four fixing
screws present;
7. check the equipment for damage. Immediately inform the shipper and the supplier
in the case of apparent damage.
Keep the packaging material for any future shipment of the equipment.
The package can be fully recycled.
4.3 Check of the content
The content of the supply is subject to thorough checking before the shipment. Nonetheless it is always advisable to
check that it is complete and in order on receiving the material.
The following list is general:
- 1 Trimod MCS EPS;
- 1 envelope of accessories containing washers for the contact with the earthing, set of screws for fitting the panels, two
eight-pole terminal strips, a serial cable and fuses (the latter are only included in models with internal batteries);
- 1 envelope of accessories containing one or more EC15 connectors according to the model and connecting jumpers for
the terminal strip (ONLY for Trimod MCS 10, 15, 20 and 30);
- 1 front closing panel;
- 2 base strips for side closing;
- user manual;
- acceptance report;
- installation and maintenance manual.
Should there be defects and/or missing material, immediately inform the LEGRAND Technical Support Service before
commissioning the equipment.
CAUTION
The installation manual must be used and consulted only by SKILLED TECHNICIANS.
INDICATION
In case of purchase of empty cabinets, the power modules and any battery drawers to install must be bought separately.
4. Unpacking and positioning