LEGRAND Trimod HE Скачать руководство пользователя страница 43

Страница: 43 / 56

Trimod HE

ser manual

DANGER

INSTALLATION and ORDINARY MAINTENANCE operations must be carried out only by SKILLED TECHNICIANS

(paragraph 2.2.1). EXTRAORDINARY MAINTENANCE operations must be carried out only by LEGRAND TECHNICAL

SUPPORT SERVICE.

7.1

Installation

DANGER

The operator is not authorized to install and connect electrically the UPS. These operations are the sole preserve of a

skilled technician (paragraph 2.2.1) who must follow the instructions addressed to him in the installation and maintenance

manual.

LEGRAND declines all liability for any injury or damage caused by activities carried out differently from the instructions

written in this manual or by a skilled technician who doesn’t follow the requirements written in the installation and

maintenance manual.

7.2

Preventive maintenance

The UPS does not contain parts for preventive maintenance by the operator.

The operator must periodically perform:

- a general external cleaning;

- a check to verify the absence of alarms on the display;

- a check to verify the correct functioning of the fans on each power module.

After the first year of life of the UPS, check the batteries every six months through the “battery calibration” function to

guarantee the optimal operation and continuous protection of the connected load. With this function, the UPS detects

the discharge curve of the batteries in order to provide precise information on the charging state.

Enter the main menu to perform this operation and follow the path: Tools



Batteries



Batt. Calibration

Press the ENTER key to confirm the choice.

Contact the LEGRAND Technical Support Service in case of problems.

7.3

Periodical checks

The correct functioning of the UPS unit must be guaranteed by periodical maintenance inspections. These are essential

to safeguard the reliability of the UPS.

WARNING

The periodical checks involve operations inside the equipment in presence of dangerous voltages. Only maintenance

personnel trained by LEGRAND are authorized to intervene.

7.4

Ordinary maintenance checks

Contact a skilled technician if it is necessary to replace or add power modules, battery drawers or external battery cabinets.

7.5

Extraordinary maintenance

Contact the LEGRAND Technical Support Service if there are failures that require the access to internal parts of the UPS.

Maintenance

Содержание Trimod HE

























































Результаты поиска

Содержание Trimod HE

Отзывы:

Бренды по названию

Популярные бренды

LEGRAND Trimod HE, Руководство пользователя

Результаты поиска

Содержание Trimod HE

Отзывы:

Бренды по названию

Популярные бренды