LEGRAND Server Technology PRO3X, Руководство пользователя

Страница: 98 / 182

Using the PRO3X Command Line Interface (CLI)
PRO3X User Guide – Command Line Interface (CLI)
98 of 182
Adding a Role-Based Access Control Rule
Depending on where you want to add a new rule in the list, the command syntax for adding a rule varies.
IPv4 commands
Add a new rule to the bottom of the IPv4 rules list:
config:# security roleBasedAccessControl ipv4 rule add <start_ip> <end_ip> <role> <policy>
Add a new IPv4 rule by inserting it above or below a specific rule:
config:# security roleBasedAccessControl ipv4 rule add <start_ip> <end_ip> <role>
<policy> <insert> <rule_number>
IPv6 commands
Add a new rule to the bottom of the IPv6 rules list:
config:#
security roleBasedAccessControl ipv6 rule add <start_ip> <end_ip> <role>
<policy>
Add a new IPv6 rule by inserting it above or below a specific rule:
config:# security roleBasedAccessControl ipv6 rule add <start_ip> <end_ip> <role>
<policy> <insert> <rule_number>
Variables:
<start_ip> is the starting IP address.
<end_ip> is the ending IP address.
<role> is the role for which you want to create an access control rule.
<policy> is one of the options:
allow or deny .
Policy Description
allow Accepts traffic from the specified IP address range
when the user is a member of the specified role
deny Drops traffic from the specified IP address range when
the user is a member of the specified role