LEGRAND Omizzy, Руководство пользователя

Страница: 22 / 40

- Procedure No. 2 :
This procedure requires the use of a PC.
Press and hold down the “Sel pushbutton (
)“.
Press the pushbutton ( ) on the remote control.
Check that the yellow “TEST ( )” indicator lamp
lights.
Transmit a second pulse.
Check that the yellow “PROG (
)” indicator lamp
lights.
Release the “Sel” pushbutton.
I / O
~
Sel
P
AUX
Attach the 2 lenses and
press the pushbutton.
A beep sounds. A short
audible signal indicates
that the remote control
teach phase has been
successful.
Caution :
This operation deletes all the remote controls which have pre-
viously been registered.
Remember to re-register them before quitting “PROG” mode
.
I / O
~
Sel
P
AUX
Sel
P
Press pushbutton “P”
on the control panel.
The yellow indicator lamp
lights and there is an
audible beep.
I / O
~
Sel
P
AUX
50 cm max
A long audible signal (approximately 4 seconds)
indicates that the programming has been unsuccess-
ful (repeat the operation).
Repeat this operation for each of the remote con-
trols to be stored.
Then click on the eye of the intruder alarm control
panel (“Control”, “Alarm”).
The control panel can now be
activated/desactivated from the server.
When the programming
has been completed,
press the
“Sel ( )”
pushbutton.
The yellow indicator lamp
(
) goes off.
I / O
~
Sel
P
AUX
Sel
P
22
Configuration (continued)