LEGRAND Omizzy, Руководство пользователя

Страница: 20 / 40

Management of alarms
The alarm management function is used to receive
and interpret intruder alarm and/or technical alarm
data in a house.
The detection of an event by an alarm is displayed
in the “Control”, “Alarm” page, which provides
information on the status of the remote alarms.
The triggering of an alarm element also enables
an e-mail to be sent as quickly as possible to warn
of the appearance of an event in the house.
The detection may also be associated with
a scenario (for example: Detection of a water leak
by a technical alarm which triggers the “Shut off
water intake” scenario).
An “Intruder alarm control panel” item is always
present in the “Installation”, “Alarm” page.
The default selection is “None”.
- Installation of a Sagane
™
intruder alarm control panel:
(Cat. No. 844 20)
- SCS :
The intruder alarm information is transmitted via
the SCS link.
LAN
Po
we
r
7,5
- 1
2 V
1A
100
-40
0 V
~
50/6
0 H
z
1
2
1
2
3
4
CAD
I I I
SCS
00 V
~
0 Hz
CAD
I
SCS
Configuring the Omizzy™ server
Click on “Installation”, “Alarm”.
Click on the “Intruder alarm control panel” item to
change its parameters.
The Sagane™ intruder alarm control panel can be
activated/deactivated from the “Control”, “Alarm”
screen, by clicking on the eye associated with it.
To make this function operational, one of the two
initialisation procedures described below must be
performed.
20
Configuration (continued)