52
4 - Alarm Out:
When alarm occurred, system enables peripheral alarm devices.
5 - Latch:
After higger alarm, alarm output will change state during the time set.
The value range is from 1 to 300 seconds.
6 - Show Message
System can pop up a message to alarm you in the local host screen if
you enabled this function.
7 - Record Channel
You can select proper channel to record alarm video (Multiple choices).
At the same time you need to set MD in schedule interface
(MAIN MENU -> SETTING -> SCHEDULE) and select schedule record in
record interface (MAIN MENU -> ADVANCED -> RECORD).
8 - PTZ Activation:
The system can go to defined preset when there is an alarm.
Click on “Select” button. Input “Preset” and the number preset..
Delay: after trigger alarm, record will be kept during the time set. The value is from 0 to 300 seconds.
9 - Tour
You can enable tour function in one window when alarm occurs.
Go to MAIN MENU -> SETTING -> DISPLAY to set the tour interval.
10 - Buzzer:
highlight the icon to enable this function. The buzzer beeps when alarm
occurs.
11 - Alarm Upload:
System can upload the alarm signal to the network (including alarm
centre) if you enabled current function.
12 - Send Email:
System can send out email to alert you when alarm occurs. You have to
configure SMTP and email setting (SETTING -> NETWORK -> Advanced
Setting EMAIL).
Please highlight icon
to select the corresponding function. After all the setups please click on the “Save”
button, system goes back to the previous menu.
