23
4 Graphic User Interface Operations
Connect the device to the monitor and to the cameras, insert the mouse and connect the power cable. Push the
on/off button in the rear panel and then you can see the analog video output. You can use the mouse to imple-
ment some simple GUI operation. Refer to the following chapter for detail information.
4.1 In live view
After device booted up, the system is in multiple-channel display mode.
You can see system date, time and channel name. If you want to change system date and time, you can refer to
general settings (MAIN MENU -> SETTING -> GENERAL). If you want to modify the channel name, please refer
to the display settings (MAIN MENU -> SETTING -> DISPLAY). For detailed operations, see paragraphe 5.5.
AChannel display
To display channels and switch between different windows, you can use:
- Right click mouse and choose “view 1”, “view 4”, “view 8” or “view 9”
- “Mult” button, on remote control or on front panel.
Information Screen
1
Recording status
3
Video loss
2
Motion detection
4
Camera lock
