LEGRAND Finelite HP-4 Скачать руководство пользователя страница 3

Страница: 3 / 9

HP-4 Wet Location Surface Mount Installation Instructions

3 of 9

TE: 09/09/19

ABC Corporation - A12345

HP-4 WL SM - 32' - S - 835 - F - 120V - SC - C4

HP-4 WL SM - X'

ID: 1

STARTER

Factory Order

Number

Job Name

Unique Luminaire

ID Number

Full Catalog

Order ID

Luminaire

Section Type

Luminaire Type

and/or Run Length

Yoke Bracket

#10-32 x 5/8" Screw

Part# 45042

Part# 43695

Mounting Starter to Structure

p. 5, Step 4

Part# 43696

Mounting Starter to Structure

p. 5, Step 4

Part# 94144

Securing Luminaire Joints

p. 8, Step 6

Part# 76407

Mounting Starter to Structure

p. 6, Step 4

Joint Luminaires

p. 7, Step 5

Part# 43637

Identification & Preparation

p. 3, Step 2

Part# 76404

Identification & Preparation

p. 3, Step 2

Closing Luminaires

p. 9, Step 7

Part# 43738

Identification & Preparation

p. 3, Step 2

Closing Luminaires

p. 9, Step 7

Part# 43694

Mounting Options & Locations

p. 2, Step 1

Identification & Preparation

p. 3, Step 2

Part# 43740

Identification & Preparation

p. 3, Step 2

Closing Luminaires

p. 9, Step 7

Step 2 - Identification & Preparation

A. Identify Luminaires

•

Identify all luminaires by their ID label that can be found on the box, the diffuser and

inside the luminaire.

•

NOTE: Exact location of labels in these areas may vary.

•

Remove all luminaires from their box.

•

Refer to record drawings that can be found in the hardware kit.

Kitted Hardware

•

Finelite has provided items

listed here, with their

Finelite part numbers.

These items can be found

in separate boxes shipped

with the luminaire.

•

Account for all parts

and set aside until they

are needed.

•

All other hardware needed

for this installation will be

by others.

B. Remove Endcap & Joint Diffuser Covers

•

Remove the magnetic screw cover from endcap and joint diffuser cover.

•

Carefully remove ALL endcap and joint diffuser covers. Failing to do so will result in

damage to gaskets.

•

Set aside the screws, endcap and joint diffusers covers to prevent from getting damaged.

Screw Cover

(provided)

Screw Cover

(provided)

Joint Diffuser Cover

(provided)

Endcap Diffuser Cover

(provided)

#6-32 x 3/8" Screw

(provided)

#6-32 x 3/8" Screw

(provided)

C. Remove Diffusers & Grommets at Required Locations

•

Carefully remove all diffusers, keeping them inside their protective bags.

•

Set aside all diffusers to prevent from getting dirty or damaged.

•

Ensure diffusers can be clearly identified back to its corresponding luminaire.

•

Use a flathead screwdriver to remove grommets at required mounting hole locations.

Backplate

Diffuser

Protective Bag

Grommet (provided)

ID Labels

1/4"-20 Sealing Washer

Screw Cover

#6-32 x 3/8" Screw

Endcap Diffuser Cover

Grommet

Joint Diffuser Cover

Nylon Nut

CAUTION

Arrange luminaires in order according

to ID# at their install locations.

Sealing O-Ring

Содержание Finelite HP-4










Результаты поиска

Содержание Finelite HP-4

Отзывы:

Похожие инструкции для Finelite HP-4

Бренды по названию

Популярные бренды

LEGRAND Finelite HP-4, Руководство по установке

Результаты поиска

Содержание Finelite HP-4

Отзывы:

Похожие инструкции для Finelite HP-4

Бренды по названию

Популярные бренды