LEGRAND EMS CX3, Техническое руководство, Страница: 35 / 98

33
TECHNICAL GUIDE
CX³ EMS E
nErgy
M
anagEMEnt
S
yStEM
WWW.LEGRAND.COM
PRODUCT SELECTION
AC + FS module Cat.No 4 149 29 is used if the “on/off/fault”
status information of a DX³ modular product such as MCBs,
RCBOs, etc are fed back to a management system.
VIEWING DATA
The AC + FS module is used to transfer status information fed
back over the EMS CX³ bus to the IP computer network, passing
via the RS485 Modbus network.
Various display modes are therefore possible:
-
Locally, in the enclosure, on the mini-configurator
Cat.No 4 149 36:
VIEWING DATA (CONTINUED)
- Remotely, on a PC, a tablet, a smarphone. The CX³ EMS / RS485
/ IP interfaces should be used in order to access devices such
as the touch screen Cat.No 0 261 56, the Energy Management
software Cat.No 4 149 38/39 and the Energy Web Servers
Cat.No 4 149 47/48/49.