LEGRAND EMS CX3, Техническое руководство, Страница: 31 / 98

29
TECHNICAL GUIDE
CX³ EMS E
nErgy
M
anagEMEnt
S
yStEM
WWW.LEGRAND.COM
SETTING PARAMETERS
■ Choice of type of use:
As indicated in the paragraph «product
selection» on page 27, all 4 microswitches
can be used to select the desired function
for the module.
The main settings are marked on
the module. For the remaining
settings you can refer to the
technical data sheet or to this
guide.
■ Additional Setting parameterss:
Some universal signalling module
applications require additional settings.
This is the case for the module associated
with a contactor or a relay.
The additional settings linked to this
function can be accessed by the CX³ EMS
configuration software.
It is possible to modify the number of
associated contacts, name them, and
change their NO, NC status.
You can refer to the CX³ EMS
configuration software user’s
guide to find out all the options,
available online.
■ Full settings by software
programming:
The universal signalling module is
supplied, in its default configuration, with
the 4 switches on zero.
They can be left in this configuration, and
all the settings can then be accessed by
the EMS configuration software.
For the configurations mentioned in the
table page 27, place the microswitches as
shown.
In this case, the software allows access to
other settings, such as:
- the name and active status of each input
- enabling and setting an alarm time delay
on the input.
The Setting parameters of the
switches can be done by software,
the switches present on the
modules are configured by default
to zero. Details and examples can
be found in the section «CX³ EMS
configuration software/Product
data sheet» on page 76.