- 11 -
Repeater Mode Overview
Repeater Mode (also called AP Mode) is similar to Client Mode, but in this case the
second N-WAP can support wireless devices within range to its location. Effectively, this is a
range expansion of the original N-WAP, by using the second N-WAP as a repeater.
To get to Repeater Mode, your second N-WAP
must already be configured in Client Mode
(see
previous section), then go to “Wireless” “Basic Settings” and select “Enable Universal Repeater Mode
(Acting as AP and Client simultaneously)”, as shown on the screen below. You’ll also need to fill out
the “SSID of Extended Interface” with the SSID that you gave the second N-WAP.
This completes the overview of the Setup Wizard, and the various Modes that are used by the
DA1101 for typical residential networks.
The following screens provide more detailed information on many of the previously discussed settings
and their associated parameters.
