LEGRAND 5739 18, Руководство по установке

Страница: 21 / 86

22
Access to the Main Menu
After performing the operations described in the “Switching on for the first time” chapter, you can
access the programming menus to perform a wide series of customisations which can exploit the
features of the Temperature control unit to the full and satisfy user requirements.
There are two programming levels:
level 1 • (user), gives access to all the menus apart from the Maintenance menu , where there
are functions which are reserved to the installer or an expert user.
Access to the user level can be protected by the User code (default disabled).
level 2 • (installer), gives access to all the menus.
Access to the installer level requires the Maintenance code (default 12345 ).
6 - Main menu
To quit the Main Menu wait for 2 minutes without pressing any key or press the
key.
When the access codes are modifi ed, they should be given in the boxes below.
MAIN MENU
Mode
User code
Zone state
Current profiles
Programming
0 0 0 0 0
NEW USER CODE
Setup
Maintenance
Mainten. code
1 2 3 4 5
NEW MAINTENANCE CODE