1/5
Catalogue number(s): 0 672 26 - 0 784 86 - 5 740 48/98
Detector switch - Dual Tech
SCS
Technical data sheet: S000077070EN-1
Updated:
Created: 17/12/2012
1. Use
This device allows a light source to be controlled automatically through
the detection of any presence in the surveillance zone using local
controls.
Presence sensor with 180° detection angle.
Detection type: infrared (PIR) and ultrasound (US)
Assembly type: wall flush mounted
2. Technical feaTUres
Voltage: 27 V
=
No-load power consumption: 20 mA
Connection between the sensor and controller: BUS/SCS cable
Wiring: 2 x 0.35 mm
2
Flush-mounting box: 40 mm min.
Weight: 60 g
Impact resistance: IK04
Penetration by solid and liquid matter: IP20
Usage temperature: - 5°C to + 45°C
Storage temperature: - 20°C to + 70°C
Type of terminals: screw
conTenTs Page
1. Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Technical characteristics. . . . . . . . . . . . . . . . .1
3. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
4. Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
5. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
6. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
7. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
8. Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . .3
9. Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4
10. Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
11. Standards and approvals . . . . . . . . . . . . . . . .5
12. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .5
LEARN
button
LED
LED
detection
ON - OFF button
PIR Detector /
Sensor
Light level
cell
US Detector /
Sensor
US Detector /
Sensor
0 672 26
0 784 86
5 740 48
5 740 98
3. Dimensions
45
45
51
35
4. connecTion
Pressing the auxiliary control allows the load to be switched on or off
manually. If the control is not pressed, the sensor will cut off the load
at the end of the time delay or when the light level threshold has been
reached.
BUS/SCS
