LEGRAND 0 672 26, Руководство пользователя

Страница: 4 / 5

4/5
Contents
Catalogue number(s): 0 672 26 - 0 784 86 - 5 740 48/98
Detector switch - Dual tech
sCs
Technical data sheet: S000077070EN-1 Updated: Created: 17/12/2012
1.2 m
m: 6 4 5 8
9. Performance
height
90°
60°
30°
0°
8 m (PIR/US)
5 m (PIR/US)
3 m
(PIR/
US)
≈ 6 m
(PIR/
US)
sensitivity Ø (m)
low (25%) 7
medium (50%) 8
high (75%) 10
Very high (100%) 12
sensitivity m
low (25%) 1
medium (50%) 1
high (75%) 2
Very high (100%)
5
sensitivity m
low (25%) 3
medium (50%) 4
high (75%)
5
Very high (100%)
6
sensitivity 0° (m) 30° (m) 60° (m) 90° (m)
low (25%) − − − −
medium (50%) 6 6 6 2
high (75%) 7 7 6 2
Very high (100%) 8 8 7 3
9.1 Pir detection (Walk-through)
9.2 Us detection (Walk-through)
9.3 Pir + Us detection (Presence)
side test:
Diagonal then side output test:
8. configUraTion (continued)
8.1 Physical configuration (continued)
The s configurator: the sensor's sensitivity
The sensor's sensitivity can be adjusted using the S configurator:
If the sensor is a Dual-Tech then the sensitivity selected is applied to all
technologies.
s
configurator
sensitivity of the sensor
No configurator Low
1 Medium
2 High
3 Very High
The T configurator: time delay
Time that the load is switched ON:
T
configurator
Time Delay (in min)
No configurator 15
1 0.5
2 1
3 2
4 5
5 10
6 15
7 20
8 30
9 40
The D configurator: light level threshold
The value of the light level threshold in lux (or set point) is set via the D
configurator:
D
configurator
lux
No configurator
Surface mounted wall installation: 300
False ceiling: 500
1 20
2 100
3 300
4 500
5 1000
8.2 Virtual configuration
The sensor is programmed via the Virtual configurator software which
can be used to modify / programme all of the sensor parameters.
8.3 lighting management configuration
- Plug’ n Go
(sensor connected to an inlet in a suspended ceiling controller)
- Push’n Learn