38
Legrand distribution blocks for use in XL
3
160 cabinets meet the needs of a wide range of requirements, providing ease of use and
maximum safety.
SUPPLY BUSBARS, TERMINAL BLOCKS, DISTRIBUTION TERMINALS
AND MODULAR DISTRIBUTION BLOCKS
1, 2, 3 or 4-pole supply busbars can be connected directly
and supply power to modular devices up to 63 A. They are a
flexible solution, take up little space and are easy to adapt
for distribution in rows. DX
3
auto devices are used to connect
supply busbars without the need for tools (see below).
DISTRIBUTION
Totally universal in their application, this type of terminal
block can be used to distribute up to 100 A on between 4 and
33 outputs, depending on the catalogue number. The incoming
cross-section is between 4 and 25 mm
2
, and that of the outputs
between 4 and 16 mm
2
. These terminal blocks are fixed on a flat
12 x 2 bar or on a
3
rail.
By combining IP 2X terminal blocks with a support Cat. No. 0 048 10, you
can create a 2P, 3P or 4P distribution block
1
HX³ SUPPLY BUSBARS
2
DISTRIBUTION TERMINAL BLOCKS