2
SAFETY
INSTRUCTIONS
■
Use only the products and accessories recommended by the Legrand Group in the catalogue, instructions, technical data sheets
and all other documents provided by Legrand (hereinafter referred to as «the Documentation») in compliance with the installation
rules.
■
Improper installation and/or use may result in the risk of arcing in the enclosure, overheating or fire. The enclosures must be used
under normal conditions, they must not be subjected to Voltage / Current / Temperature values other than those specified in the
Documentation.
■
Legrand declines all responsibility for any modification or repair of the equipment making up the enclosure that is not authorized by
the Legrand Group, as well as any failure to comply with the rules and recommendations specified by Legrand in the Documentation.
In addition, in the cases mentioned above, the warranty granted by Legrand will not be applicable.
■
It is necessary to check that the characteristics of the products are appropriate for their environment and use during maintenance
operations, and to refer to the Documentation. If you have any questions or require clarification, please contact Legrand Group.
■
The installation, use and maintenance of the enclosures and their components must be carried out by qualified, trained and
authorized personnel, in accordance with the regulations in force in each country.
RISK OF ELECTRIC SHOCK, BURNS AND EXPLOSION.
■
People working on the installation must have the appropriate electrical authorizations for the work to be carried out.
■
Wear the PPE (Personal Protective Equipment) necessary to work on live products.
■
Respect the safety rules related to electrical work.
■
Improper electrical and mechanical use of equipment can be dangerous and may result in personal injury or damage to property.
■
Depending on the maintenance operations to be carried out, partial or total power cuts of the enclosure concerned should be
planned before any work.
■
When performing operations that involve access to the inside of the enclosure, be aware of the risk of burns before touching any
products or metal parts.
■
Before turning the power back on, make sure that there are no foreign bodies and that all physical protections have been put back
in place (e.g.: screens, covers, shields).
General information
