STYLE™
foundation
design
99301567-d
8
INSTALLATION
STEP 5
Plug electrical power cord into a working, grounded electrical outlet.
Note: An electrical surge protection device is recommended (not included).
STEP 6
Install batteries in remote control (3-AAA, included) (
FIGURE 2
).
Note:
Make sure batteries are properly oriented.
Briefl y activate all functions of the
base with the remote control to verify all features are in working order. If
base does not operate, refer to the
Troubleshooting
section of this manual.
BATTERY
COMPARTMENT
DOOR
PRESS IN ON TAB AND LIFT
OUT TO REMOVE BATTERY
COMPARTMENT DOOR. INSERT
TABS IN TAB SLOTS AND SNAP
IN TO REPLACE.
POSITIVE (+)
END
POSITIVE (+)
END
STEP 7
Return base to the level position.
STEP 8
Remove the plastic packaging from the base frame. Carefully rotate the
adjustable base over to position the base so it is resting on its legs.
FIGURE 2
