5
STYLE™
foundation
design
99301567-d
ACOUSTICS
LIFTING/LOWERING MECHANISMS
The lift/lower feature will emit a minimal humming
sound during operation. This is normal.
During operation, the lift arm wheels make contact
with the platform support of the base. This
applies slight tension on the moving components
and resonance is reduced to a minimum level. If
excessive noise or vibration is experienced, reverse
the movement action (up or down) of the base with
the remote control. This should realign the base’s
activating mechanisms to the proper operational
position.
MASSAGE OPERATION
The massage feature will emit a minimal tone
during operation. This is normal. When the massage
level is increased, motor resonance will intensify
accordingly.
LOCATION ENVIRONMENT
The level of sound experienced during operation
is directly related to the location environment. For
example, when a base is located on a hardwood floor
with the massage feature in operation, a vibrating
tone will be audible. To minimize this resonance,
place a piece of carpet, or rubber caster cups, under
each leg or caster of the base.
It is possible to experience vibration or noise from
the headboard brackets, headboards or footboards if
mounting bolts are not firmly tightened.
FABRIC CLEANING INFORMATION
Spot clean only with water based shampoo or foam
upholstery cleaner. Pretest a small, inconspicuous
area before proceeding. Do not over wet. Do not
use solvents to spot clean. Pile fabrics may require
brushing with a non-metallic, stiff bristle brush to
restore appearance.
Hot water extraction or steam
cleaning is not a recommended cleaning method.
To prevent overall soiling, frequent vacuuming or
light brushing with a non-metallic stiff bristle brush
to remove dust and grime is recommended. When
cleaning a spill, blot immediately to remove spilled
material. Clean spots or stains from the outside to
the middle of the affected area to prevent circling.
Use a professional furniture cleaning service when
an overall soiled condition is apparent.
