STYLE™
foundation
design
99301567-d
14
REMOTE CONTROL FUNCTION
NOTE
REMOTE CONTROL REQUIRES THREE (3) AAA SIZE BATTERIES. TO CONSERVE BATTERY LIFE, THE
TRANSMITTER TURNS OFF ALL FUNCTIONS WHEN ANY BUTTON IS PRESSED FOR MORE THAN 50 SECONDS.
TORCH BUTTON
Press and hold to use the fl ashlight
feature.
LOCK BUTTON
To lock / unlock the remote control
buttons, press and hold
lock button
for
5 seconds. Backlight will fl ash 3 times.
HEAD MASSAGE INTENSITY BUTTONS
Press to increase/decrease massage
intensity. Massage has 3 speeds:
Low, medium and high. Massage will
automatically shut off after 15 minutes.
FOOT MASSAGE INTENSITY BUTTONS
Press to increase/decrease massage
intensity. Massage has 3 speeds:
Low, medium and high. Massage will
automatically shut off after 15 minutes.
MASSAGE ON/OFF BUTTON
Press to turn massage motors on or off.
HEAD UP/DOWN BUTTONS
Press and hold to raise or lower the
head section.
FOOT UP/DOWN BUTTONS
Press and hold to raise or lower the
foot section.
TV POSITION BUTTON
Press to adjust the base to the
preprogrammed TV viewing position to
maximize comfort and entertainment.
This position is reprogrammable using
the
set button
. To reprogram, adjust
base to desired position, press and hold
the
set button
until the massage motors
turn on and off, then press and hold
the
tv position button
until the massage
motors turn on and off.
CUSTOM BUTTON
To program a position, adjust base to
desired position, press and hold the
set
button
until the massage motors turn
on and off, then press and hold the
cust
button
until the massage motors turn
on and off.
ZERO GRAVITY BUTTON
Press to adjust the base to the
preprogrammed reclined position for
optimum weight distribution allowing
total comfort and relaxation. This position
is reprogrammable using the
set button
.
To reprogram, adjust base to desired
position, press and hold the
set button
until the massage motors turn on and
off, then press and hold the
z grav button
until the massage motors turn on and off.
FLAT BUTTON
Press to adjust the base to the level position.
UNDERBED LIGHT BUTTON
Press to turn on/off underbed light feature.
WAVE BUTTON
After the head and/or foot massager/s
have been activated and the desired
intensity has been achieved, press to
turn the wave on. Press to increase wave
speed. Note: When active, wave intensity
indicator (shown here) will light up.
SET BUTTON
Use to program
z grav
,
tv
, and
cust
presets.
PRESS & HOLD TO ONE TOUCH
To change remote control functions from “press and hold” to “one touch” (“one touch” = press and release), simultaneously
press the
HEAD MASSAGE DOWN
and
FOOT MASSAGE DOWN
buttons for 5 seconds. The massage motor will turn on and off
confi rming the change. Your base is now set to “one touch.”
When in “one touch” mode:
Zero Gravity, Custom, and TV Position buttons
Press and release (one touch) button. Base will adjust to the programmed position. Press any other button to stop the base during movement.
Flat button
Press and release (one touch) button. Base will shut off massage motor, if active, and adjust base to level position. Press any other
button to stop the base during movement.
To revert back to
factory settings
, simultaneously press and hold the
SET
button and the
FLAT
button for 5 seconds. The massage
motor will turn on and off confi rming the change. Your base is now set to factory settings.
Note: Zero Gravity and TV Positions will
revert to factory preprogrammed positions.
