Prodigy™ 2.0 Adjustable Base Owners Manual 99301584-c
9
Typical Prodigy™ 2.0 adjustable base installation is now complete.
STEP 10
Install mattress on adjustable base.
MATTRESS RETAINER INSTALLATION (OPTIONAL)
Mattress is equipped with a MicroHook™ system
to captivate the mattress (
FIGURE 4
), but if
desired a mattress retainer can also be used. If
installing a mattress retainer, proceed to Step 9.
If not installing a mattress retainer, proceed to
Step 10.
FIGURE 4
Micro-Hook
™
SYSTEM
FOOT END OF BASE
IMPORTANT!
THIS PRODUCT SHOULD
NOT
BE USED WITH
EITHER A DUST RUFFLE OR A MATTRESS
ENCASEMENT. IF EITHER A DUST RUFFLE
OR MATTRESS ENCASEMENT IS NEEDED,
THEN A MATTRESS RETAINER BAR IS
REQUIRED.
Micro-Hook
™
DETAIL
INSTALLATION
STEP 9
Install mattress retainer at the foot end of the adjustable base as follows:
a. Locate grommeted holes at foot end of base.
b. Place mattress retainer ends into grommeted holes in top surface
of adjustable base (
FIGURE 5
). Press down until horizontal retainer
section is fl ush against base.
MATTRESS
RETAINER
FIGURE 5