7
ASSEMBLY
FIGURE 3
LEG
Note: Typical leg
installation shown.
Actual product may
vary slightly.
IMAGES SHOWN MAY DIFFER FROM ACTUAL
PRODUCT.
NOTE
STEP 3
Screw (6) legs into the leg plates on the base
frame (FIGURE 3). Tighten securely.
STEP 4
Rotate base over onto its legs.
STEP 5
Install 2-AAA batteries in the remote control.
Operate remote control to verify base functions
properly. If base does not operate, see the
Troubleshooting section.
STEP 6
Lower base to flat position.
DUE TO RISK OF INJURY, TWO ADULTS
ARE REQUIRED TO HANDLE AND MOVE
ADJUSTABLE BASE.
WARNING
!