Y-120 K/CK Adjustable Base Owners Manual 290-0089
8
INSTALLATION
STEP 4
Install (4) legs into the tapped fittings at the four
corners of the base frame (
FIGURE 3
). Install (2) legs
at the hinge area (
FIGURE 4
).
Note: Install the (2) legs
at the hinge (in diagonal position across the center
fold of base - see FIGURE 4).
IMPORTANT: IF BASE IS TO BE INSTALLED IN CASE
GOOD OR BED FRAME, MEASURE CLEARANCE
HEIGHT OF CASE GOOD/FRAME AND ADJUST LEGS
ACCORDINGLY FOR SUPPORT AND FIT.
STEP 5
Extend electrical power cord out head end of base.
Plug electrical power cord into a working, grounded
electrical outlet.
Note: An electrical surge protection
device is recommended (not included).
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE
MECHANISMS.
DO NOT WEAVE CORDS THROUGH BASE
STRUCTURE.
WARNING
WARNING
READ ALL INSTRUCTIONS BEFORE USING
LEGS – SCREW
INTO TAPPED
HOLE AT
EACH CORNER
FIGURE 3
FIGURE 4
INSTALL POINTS
OF CENTER LEGS
(installed diagonally
across center fold)
HINGE
HINGE
CENTER LEG
CENTER FOLD
OF BASE
HEAD END
OF BASE
FOOT END
OF BASE
CENTER LEG
NOTE:
IMAGES SHOWN MAY DIFFER FROM ACTUAL
PRODUCT.
