Y-120 K/CK Adjustable Base Owners Manual 290-0089
14
REMOTE CONTROL PROGRAMMING
Reprogram Two Remote Controls for Individual
Base Operation
- Bases are factory programmed
to operate individual bases. To reprogram bases
synced to multiple remote controls, perform the
following numbered procedure. Individual base
operation will result.
If programming fails, initiate
the programming procedure a second time.
REMOTE CONTROL 1
REMOTE CONTROL 2
STEP 1
UNPLUG
both bases from the electrical power
source (if plugged in) and wait 3 minues.
STEP 2
Plug
base 1
into the electrical power source.
You now have 3 minutes to complete the
programming procedure. The programming indicator
(under bed light) will flash to indicate programming
mode.
STEP 3
Simultaneously press and hold the
head up
and
foot up
buttons on
remote control 1
for 2 seconds.
Release both buttons.
Press the
flat
button, then the
head up
or
foot
up
button on
remote control 1
to verify
base 1
functions.
STEP 4
Plug
base 2
into the electrical power source.
You now have 3 minutes to complete the
programming procedure. The programming indicator
(under bed light) will flash to indicate programming
mode.
STEP 5
Simultaneously press and hold the
head up
and
foot up
buttons on
remote control 2
for 2 seconds.
Release both buttons.
Press the
flat
button, then the
head up
or
foot
up
button on
remote control 2
to verify
base 2
functions.
Independent operation is now restored. Remote control
1 operates base 1; remote control 2 operates base 2.
BASE 1
BASE 2
