Y-120 K/CK Adjustable Base Owners Manual 290-0089
15
POWER DOWN OPERATION
STEP 1
Verify power supply is unplugged from electrical power source.
To lower base to the flat position during an electrical power outage,
complete the following procedure:
STEP 2
Locate (1) power down device and two (2) 9-volt alkaline batteries (not included)
(
FIGURE 7
).
STEP 3
Install (2) 9-volt alkaline batteries in power down device (
FIGURE 8
).
FIGURE 7
FIGURE 8
(1) POWER
DOWN
DEVICE
(2) 9-VOLT
ALKALINE
BATTERIES
(NOT
INCLUDED)
ALKALINE
BATTERIES
INSTALL ONLY
ONE WAY IN
POWER DOWN
DEVICE
FOR EMERGENCY USE ONLY. BATTERIES
ARE
NOT
TO BE USED FOR NORMAL
OPERATION OF BASE (9-VOLT ALKALINE
BATTERIES NOT INCLUDED)
NOTE
