Leggett & Platt BRIO B-120, Руководство пользователя

Страница: 7 / 28

7
ASSEMBLY
FIGURE 3
Micro-Hook ™
SYSTEM
Micro-Hook ™
DETAIL
STEP 6
Remove remaining packaging and any protective film.
STEP 7
Plug the base into an electrical power source. Note: An electrical
surge protection device is recommended, but not included.
STEP 9
Lower base to flat position.
STEP 8
Install 2-AAA batteries in the remote control. Operate remote
control to verify base functions properly. If base does not operate,
see the Troubleshooting section.
MATTRESS RETAINER INSTALLATION (OPTIONAL)
Base is equipped with a Micro-Hook™ system to captivate the mattress as
shown in FIGURE 3, but a mattress retainer can also be used.
Important: If using a dust ruffle or mattress encasement with this product,
a mattress retainer must be used.
STEP 5
Rotate the base in the bottom shipping carton onto its edge, and then
rotate the base over onto its legs.
DUE TO RISK OF INJURY, TWO ADULTS
ARE REQUIRED TO HANDLE AND MOVE
ADJUSTABLE BASE.
WARNING
!