Leggett & Platt BRIO B-120, Руководство пользователя

Страница: 11 / 28

11
REMOTE CONTROL PROGRAMMING - 1 OR 2 REMOTES TO OPERATE 2 BASES
STEP 1
Plug both bases into power outlet. Operate each
base with its respective remote control to verify the
base functions properly. Lower both bases to the flat
position.
STEP 2
UNPLUG both bases.
STEP 3
Place both bases on their sides close to each other.
CAUTION: DUE TO RISK OF INJURY, TWO
ADULTS ARE REQUIRED TO HANDLE AND MOVE
ADJUSTABLE BASE.
STEP 4
Locate the sync cable (FIGURE 8).
STEP 6
Plug the ends of the sync cable into the sync port
(on the control box) of BOTH bases (FIGURE 9).
STEP 7
Replace the connection cover on BOTH control
boxes.
STEP 8
Turn both bases over onto their legs.
CAUTION: MAKE SURE SYNC CABLE IS NOT
CAUGHT IN BASE OR PINCH POINTS.
STEP 9
Plug both bases back into power outlet.
STEP 10
Operate the remote control(s) to verify both bases
function simultaneously. If using only one remote
control to operate both bases, store the second remote
for use as a spare.
Note: To revert back to 1-to-1 programming, remove
sync cable from control boxes.
STEP 9
Remove the connection cover on the control box
(press tabs in and lift up) of BOTH bases (FIGURE
9).
BASE 1
BASE 2
OR
REMOTE 1 REMOTE 2
SYNC CABLE
FIGURE 8
SYNC
CABLE
SYNC
PORT
CONTROL
BOX
CONNECTION
COVER
FIGURE 9
LEARN
BUTTON
TAB
TAB