GSM SMS Alarm Messenger
SMSPro (Version 7)
35
11.25)
System Parameters Report (about AD channels)
PWD:XXXX,PARAMETER
2
%
[SMS Message received]
ST:XXX;VL:XXXXX,O:AX,BBBB,CCC;
A1M:XXXXX,UUUUU,YYYYY,R,HHHHH,PPPPP,O:AX,
BBBBBBBB,CCC;
A2M:XXXXX,UUUUU,YYYYY,R,HHHHH,PPPPP,O:AX,BBBBBBBB,CCC;
#
A1
AD
Channel
1
M:
XXXXX
Range Upper Limit
UUUUU
Range Lower Limit
YYYYY
Start
Value
R
1
AD Channel Alarm enabled
0
AD Channel Alarm disabled
HHHHH
Alarm Triggered Alert High Value
PPPPP
Alarm Triggered Alert Low Value
O:
A
alarm report to Control Centre 1
0 means no report
1 means report
X
alarm report to Control Centre 2
0 means no report
1 means report
BBBBBBBB
report status for 8 phone numbers
0 means no report
1 means “SMS” but no “phone dialing”
2 means “phone dialing” but no “SMS”
3 means “SMS” and then “phone dialing”
CCC
relay output control
0 means relay is not controlled by alarm
1 means relay is turned on by alarm
A2M…
AD
Channel
2
Note:
AI1 and AI2 values are reported by COMMAND [PWD:XXXX,STATUS%]
