Anti-tamper alarm:
After the keypad is paired to a hub and installed on a bracket, the anti-tamper button will be pressed down. Once it is
took off the bracket the anti-tamper alarm will be triggered after countdown. Perform the disarm action to stop the
countdown.
Reset or manual pairing:
If you need to manually pair the keypad with the hub, or reset the keypad, just press the reset button on the back with
the reset pin(comes in the package), hold for 3 seconds and release. The keypad will clear all the network information
and reboot, and all the LED will be on for a moment with 2 beeps. Then the reset is done. After reset, it will start to
search and join the hub again.
6
Mount the keypad on the wall
Prior to installing on the wall, please perform arming and disarming operation at the location where
you decide to mount the keypad, to make sure the wireless signal is good.
The mounting location should be somewhat near the door you usually use to enter or exit the home.
Do not install the Keypad:
1. outside the premises (outdoors).
2. near the metal objects and mirrors that cause radio signal attenuation or shading it.
3. near the powerful main wiring.
Installation:
Step 1: Fix the bracket to the wall with either by
A.
Screws
B.
Double-sided adhesive tape for different surfaces.
