Ledwood EXPLORER T16, Руководство пользователя

Страница: 4 / 60

4
Charge the charging case
1) Plug the small end of the USB cable into the Micro USB port of the charging case.
2) Plug the other end into a USB wall charger or computer (DC 5V) that is powered on.
Note : It takes approximately 2 hours to fully charge the charging case. A fully charged char-
ging case can charge the earbuds approximately 3 times.
POWER ON & OFF
Automatic operation
Power on: Open the lid of the charging case and take the earbuds out.
Power off: Put the earbuds back into the charging case.
Note : When the charging case is out of power, putting the earbuds back in the charging case
will not turn the earbuds off.
Manual operation
Power on/off: Tap and hold the touch button on the left/right earbud for 5 se-
conds.
Note : When the two earbuds are paired with the phone, turn off one earbud manually will
make the other one be off at the same time.
Pairing & Connectivity
1 - Turn on the Bluetooth of your Bluetooth device.
2 - Take the earbuds out of the charging case and they will enter pairing mode automatically and
the LED indicator on the earbud will flash red and blue alternately.
3 - Choose «T16» from the list of found Bluetooth devices on your Bluetooth device to pair.
Notes :
• Make sure the earbuds and your Bluetooth device are next to each other within 33 feet or 10
meters and there are no obstacles between.
• If pairing failed, put the earbuds back into the charging case make sure that they have been
turned off. Then pair the earbuds with your Bluetooth device again.
• When the earbuds are on but not paired with a Bluetooth device, they will be automatically
off after 5 minutes.
• The earbuds will connect to the last paired Bluetooth device automatically when they are
turned on. Please turn on the Bluetooth of your Bluetooth device before turning on the earbuds.
PRIMARY/SECONDARY MODE
These earbuds have primary-secondary switch function.
• When the earbuds have been connected to a Bluetooth device, take out either of the two ear-
buds, it can be connected and used normally. During this period, you can take out the other
one and they will pair with each other so you can use both of the earbuds.
• When both earbuds are connected to your phone, no matter which one is put back to the
charging case, you can use the other one without interruption.
EARBUDS FUNCTIONS
Function What to do
Play/Pause Tap the touch button of the left/right earbud.
Next track Double-tap the touch button of the left/right earbud.
Previous track Tap the touch button of the left/right earbud three times.
CALL FUNCTIONS
Function What to do
Answer/end a call Tap the touch button of the left/right earbud.
Decline an incoming call Double-tap the touch button of the left/right earbud.
ACTIVATE VOICE CONTROL OF PHONE
After the earbuds are connected to your phone, tap and hold the touch button for 2 seconds
and remove your finger from the touch button.
Tap and hold the touch button for 2 seconds again to exit. (This function works only when
your phone has voice control function; please refer to the instructions of your phone for
details.)
SAFETY AND WARRANTY
Important safety instructions